Iptables Tutorial 1.1.19

# also get flooded by Multicasts. We drop them so we do not get flooded by

# logs

#

#$IPTABLES -A INPUT -i $INET_IFACE -d 224.0.0.0/8 -j DROP

#

# Log weird packets that don't match the above.

#

$IPTABLES -A INPUT -m limit –limit 3/minute –limit-burst 3 -j LOG \

–log-level DEBUG –log-prefix "IPT INPUT packet died: "

#

# 4.1.5 FORWARD chain

#

#

# Bad TCP packets we don't want

#

$IPTABLES -A FORWARD -p tcp -j bad_tcp_packets

#

# Accept the packets we actually want to forward

#

$IPTABLES -A FORWARD -p tcp –dport 21 -i $LAN_IFACE -j ACCEPT

$IPTABLES -A FORWARD -p tcp –dport 80 -i $LAN_IFACE -j ACCEPT

$IPTABLES -A FORWARD -p tcp –dport 110 -i $LAN_IFACE -j ACCEPT

$IPTABLES -A FORWARD -m state –state ESTABLISHED,RELATED -j ACCEPT

#

# Log weird packets that don't match the above.

#

$IPTABLES -A FORWARD -m limit –limit 3/minute –limit-burst 3 -j LOG \

–log-level DEBUG –log-prefix "IPT FORWARD packet died: "

#

# 4.1.6 OUTPUT chain

#

#

# Bad TCP packets we don't want.

#

$IPTABLES -A OUTPUT -p tcp -j bad_tcp_packets

#

# Special OUTPUT rules to decide which IP's to allow.

#

$IPTABLES -A OUTPUT -p ALL -s $LO_IP -j ACCEPT

$IPTABLES -A OUTPUT -p ALL -s $LAN_IP -j ACCEPT

$IPTABLES -A OUTPUT -p ALL -s $INET_IP -j ACCEPT

#

# Log weird packets that don't match the above.

#

$IPTABLES -A OUTPUT -m limit –limit 3/minute –limit-burst 3 -j LOG \

–log-level DEBUG –log-prefix "IPT OUTPUT packet died: "

######

# 4.2 nat table

#

#

# 4.2.1 Set policies

#

#

# 4.2.2 Create user specified chains

#

#

# 4.2.3 Create content in user specified chains

#

#

# 4.2.4 PREROUTING chain

#

#

# 4.2.5 POSTROUTING chain

#

#

# Enable simple IP Forwarding and Network Address Translation

#

$IPTABLES -t nat -A POSTROUTING -o $INET_IFACE -j SNAT –to-source $INET_IP

#

# 4.2.6 OUTPUT chain

#

######

# 4.3 mangle table

#

#

# 4.3.1 Set policies

#

#

# 4.3.2 Create user specified chains

#

#

# 4.3.3 Create content in user specified chains

#

#

# 4.3.4 PREROUTING chain

#

#

# 4.3.5 INPUT chain

#

#

# 4.3.6 FORWARD chain

#

#

# 4.3.7 OUTPUT chain

#

#

# 4.3.8 POSTROUTING chain

#

I.4. Пример rc.DHCP.firewall

#!/bin/sh

#

# rc.firewall – DHCP IP Firewall script for Linux 2.4.x and iptables

#

# Copyright (C) 2001 Oskar Andreasson <bluefluxATkoffeinDOTnet>

#

# This program is free software; you can redistribute it and/or modify

# it under the terms of the GNU General Public License as published by

# the Free Software Foundation; version 2 of the License.

#

# This program is distributed in the hope that it will be useful,

# but WITHOUT ANY WARRANTY; without even the implied warranty of

# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the

# GNU General Public License for more details.

#

# You should have received a copy of the GNU General Public License

# along with this program or from the site that you downloaded it

# from; if not, write to the Free Software Foundation, Inc., 59 Temple

# Place, Suite 330, Boston, MA 02111-1307 USA

#

###########################################################################

#

# 1. Configuration options.

#

#

# 1.1 Internet Configuration.

#

INET_IFACE="eth0"

#

# 1.1.1 DHCP

#

#

# Information pertaining to DHCP over the Internet, if needed.

#

# Set DHCP variable to no if you don't get IP from DHCP. If you get DHCP

# over the Internet set this variable to yes, and set up the proper IP

# address for the DHCP server in the DHCP_SERVER variable.

#

DHCP="no"

DHCP_SERVER="195.22.90.65"

#

# 1.1.2 PPPoE

#

# Configuration options pertaining to PPPoE.

#

# If you have problem with your PPPoE connection, such as large mails not

# getting through while small mail get through properly etc, you may set

# this option to «yes» which may fix the problem. This option will set a

# rule in the PREROUTING chain of the mangle table which will clamp

# (resize) all routed packets to PMTU (Path Maximum Transmit Unit).

#

# Note that it is better to set this up in the PPPoE package itself, since

# the PPPoE configuration option will give less overhead.

#

PPPOE_PMTU="no"

#

# 1.2 Local Area Network configuration.